FLUKE

Test & Measurement

test-measurement

Electrical Power Testing

electrical-power-testing

Kennedy

FORCE

ELORA

Iwata

WIHA

MAKITA

Logitech

Enerpac

Fluke Networks

Impact Sockets

IT Accessories

Screwdriver Bits & Bit Set

Screwdrivers

Ring Spanners

Sockets

Hex Keys & Sets

Open End Spanners

Painting Tools

Ball Bearings

Stefy

Fluke 1AC-II 1AC Non Contact Voltage Detector, 200V to 1000V

fluke 1ac-ii 1ac non contact voltage detector, 200v 1000v detektor tegangan nonkontak 1ac, hingga electrical power testing pengujian daya listrik pengesan voltan tanpa sentuhan ujian tenaga elektrik 非接触式电压检测器，200v 电力测试 福禄克

fluke-1ac-ii-1ac-non-contact-voltage-detector-200v-to-1000v

 The portable 1AC II non-contact voltage tester from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home and even detect miswires of an electrical outlet.   

Be aware of voltage easily – the tip glows red and a beeper sounds when voltage is detected

Continuous self-test so you always know it’s working

Voltage detection range for wide application use – 90 V to 1000 V AC or 200 V to 1000 V AC

Audible/Silent mode for added convenience

The tip glows red and a beeper sounds when voltage is detected

A loud, easy to hear beeper will sound and the tip will glow red when voltage is detected

Optionally, the beeper can be disabled for use in quiet environments

When the tip blinks red you know it’s working properly

Provides a continual visual indication that the 1AC II is on

90 V to 1000 V AC or 200 V to 1000 V AC voltage detection range for wide application use

Wide voltage detection range allows for use in a broad range of applications

Also available in a low voltage model from 20 V to 90 V AC for controls circuits

Rated to CAT IV 1000 V for added protection

Audible/Silent mode for added convenience in quiet environments

Operating Principles: Senses the steady-state electrostatic field produced by AC voltage through insulation without requiring contact with the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.

Voltage Sensing Ranges: Nominally, 90 V AC to 1000 V AC

Safety: IEC 61010-1: Pollution Degree 2, IEC 61010-2-030: CAT IV 1000 V

Operating Temperature: -10°C to 50°C (-14°F to 122°F)

Batteries: 2 AAA alkaline batteries included

Battery Life: Typical battery life of greater than 1 year

<h3 class="md-block-header-three">Fluke 1AC Ii Non-Contact Voltage Tester</h3> The portable 1AC II non-contact voltage tester from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there&#x27;s voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home and even detect miswires of an electrical outlet. <ul class="md-block-unordered-list-item"><li>Be aware of voltage easily – the tip glows red and a beeper sounds when voltage is detected</li><li>Continuous self-test so you always know it’s working</li><li>Voltage detection range for wide application use – 90 V to 1000 V AC or 200 V to 1000 V AC</li><li>Audible/Silent mode for added convenience</li></ul>The tip glows red and a beeper sounds when voltage is detected<ul class="md-block-unordered-list-item"><li>A loud, easy to hear beeper will sound and the tip will glow red when voltage is detected</li><li>Optionally, the beeper can be disabled for use in quiet environments</li></ul>Continuous self-test so you always know it’s working<ul class="md-block-unordered-list-item"><li>When the tip blinks red you know it’s working properly</li><li>Provides a continual visual indication that the 1AC II is on</li></ul>90 V to 1000 V AC or 200 V to 1000 V AC voltage detection range for wide application use<ul class="md-block-unordered-list-item"><li>Wide voltage detection range allows for use in a broad range of applications</li><li>Also available in a low voltage model from 20 V to 90 V AC for controls circuits</li></ul>Safety features<ul class="md-block-unordered-list-item"><li>Rated to CAT IV 1000 V for added protection</li><li>CE and CSA approved</li></ul>Additional tool features<ul class="md-block-unordered-list-item"><li>Audible/Silent mode for added convenience in quiet environments</li><li>On/Off button</li><li>Batteries included</li></ul>Specifications<ul class="md-block-unordered-list-item"><li>Operating Principles: Senses the steady-state electrostatic field produced by AC voltage through insulation without requiring contact with the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.</li><li>Voltage Sensing Ranges: Nominally, 90 V AC to 1000 V AC</li><li>Detector Tip Style: Flat-tip</li><li>Light Source: One high-intensity red LED</li><li>Agency Approvals: </li><li>Safety: IEC 61010-1: Pollution Degree 2, IEC 61010-2-030: CAT IV 1000 V</li><li>EMC: IEC 61326-1: Portable</li><li>IP Rating: IP 40</li><li>Operating Temperature: -10°C to 50°C (-14°F to 122°F)</li><li>Operating Humidity Ranges: </li><li>0% to 95% (0°C to 30°C)</li><li>0% to 75% (30°C to 40°C)</li><li>0% to 45% (40°C to 55°C)</li><li>Operating Altitude: 3000 m</li><li>Cleaning: Clean with a damp cloth</li><li>Batteries: 2 AAA alkaline batteries included</li><li>Battery Life: Typical battery life of greater than 1 year</li></ul>

<h3>Fluke 1AC Ii Non-Contact Voltage Tester</h3>
&nbsp;The portable 1AC II non-contact voltage tester from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home and even detect miswires of an electrical outlet.&nbsp;&nbsp;&nbsp;
<ul>
<li>Be aware of voltage easily – the tip glows red and a beeper sounds when voltage is detected</li>
<li>Continuous self-test so you always know it’s working</li>
<li>Voltage detection range for wide application use – 90 V to 1000 V AC or 200 V to 1000 V AC</li>
<li>Audible/Silent mode for added convenience</li>
</ul>
The tip glows red and a beeper sounds when voltage is detected
<ul>
<li>A loud, easy to hear beeper will sound and the tip will glow red when voltage is detected</li>
<li>Optionally, the beeper can be disabled for use in quiet environments</li>
</ul>
Continuous self-test so you always know it’s working
<ul>
<li>When the tip blinks red you know it’s working properly</li>
<li>Provides a continual visual indication that the 1AC II is on</li>
</ul>
90 V to 1000 V AC or 200 V to 1000 V AC voltage detection range for wide application use
<ul>
<li>Wide voltage detection range allows for use in a broad range of applications</li>
<li>Also available in a low voltage model from 20 V to 90 V AC for controls circuits</li>
</ul>
Safety features
<ul>
<li>Rated to CAT IV 1000 V for added protection</li>
<li>CE and CSA approved</li>
</ul>
Additional tool features
<ul>
<li>Audible/Silent mode for added convenience in quiet environments</li>
<li>On/Off button</li>
<li>Batteries included</li>
</ul>
Specifications
<ul>
<li>Operating Principles: Senses the steady-state electrostatic field produced by AC voltage through insulation without requiring contact with the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.</li>
<li>Voltage Sensing Ranges: Nominally, 90 V AC to 1000 V AC</li>
<li>Detector Tip Style: Flat-tip</li>
<li>Light Source: One high-intensity red LED</li>
<li>Agency Approvals: 
</li>
<li>Safety: IEC 61010-1: Pollution Degree 2, IEC 61010-2-030: CAT IV 1000 V</li>
<li>EMC: IEC 61326-1: Portable</li>
<li>IP Rating: IP 40</li>
<li>Operating Temperature: -10°C to 50°C (-14°F to 122°F)</li>
<li>Operating Humidity Ranges: 
</li>
<li>0% to 95% (0°C to 30°C)</li>
<li>0% to 75% (30°C to 40°C)</li>
<li>0% to 45% (40°C to 55°C)</li>
<li>Operating Altitude: 3000 m</li>
<li>Cleaning: Clean with a damp cloth</li>
<li>Batteries: 2 AAA alkaline batteries included</li>
<li>Battery Life: Typical battery life of greater than 1 year</li>
</ul>

Fluke 1AC Ii Non-Contact Voltage Tester

fluke 1ac ii non-contact voltage tester penguji tegangan non-kontak electrical power testing pengujian daya listrik voltan bukan kenalan ujian tenaga elektrik fluke/福禄克 非接触式电压测试仪 电力测试 福禄克

fluke-1ac-ii-non-contact-voltage-tester

The next generation VoltAlert™ AC non-contact voltage testers from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home. 

Voltbeat™ technology and continuous self-test – so you always know it’s working

Upon detection, tip glows and beeper sounds

20 V to 90 V AC control circuit model also available

Safety Compliance: Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01 Pollution Degree 2

<h3 class="md-block-header-three"> Fluke 1AC Ii Voltalert 5-pack</h3>The next generation VoltAlert™ AC non-contact voltage testers from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there&#x27;s voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home. <ul class="md-block-unordered-list-item"><li>Voltbeat™ technology and continuous self-test – so you always know it’s working</li><li>Upon detection, tip glows and beeper sounds</li><li>CAT IV 1000 V for added protection</li><li>Expanded range: 90 V AC to 1000 V AC</li><li>20 V to 90 V AC control circuit model also available</li><li>Two-year warranty</li><li>Batteries included</li><li>On/Off Button</li><li>Audible/Silent</li><li>5 pack</li></ul>Specifications<ul class="md-block-unordered-list-item"><li>Operating Principles: Senses the steady-state electrostatic field produced by AC voltage through insulation without requiring contact with the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.</li><li>Voltage Sensing Ranges: Nominally, 90 V AC to 1000 V AC</li><li>Detector Tip Style: Flat-tip</li><li>Light Source: One high-intensity red LED</li><li>Agency Approvals: c CSA us, CE, C-Tick</li><li>Safety Rating: 1000 V, CAT IV</li><li>Safety Compliance: Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01 Pollution Degree 2</li><li>EMC Compliance: Meets IEC 61326-1:2006</li><li>IP Rating: IP 40</li><li>Operating Temperature: -10°C to 50°C (-14°F to 122°F)</li><li>Operating Humidity Ranges: </li><li>0% to 95% (0°C to 30°C)</li><li>0% to 75% (30°C to 40°C)</li><li>0% to 45% (40°C to 55°C)</li><li>Operating Altitude: 3000 m</li><li>Cleaning: Clean with a damp cloth</li><li>Batteries: 2 AAA alkaline batteries included</li><li>Battery Life: Typical battery life of greater than 1 year</li></ul>

<h3> Fluke 1AC Ii Voltalert 5-pack</h3>
The next generation VoltAlert™ AC non-contact voltage testers from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.&nbsp;
<ul>
<li>Voltbeat™ technology and continuous self-test – so you always know it’s working</li>
<li>Upon detection, tip glows and beeper sounds</li>
<li>CAT IV 1000 V for added protection</li>
<li>Expanded range: 90 V AC to 1000 V AC</li>
<li>20 V to 90 V AC control circuit model also available</li>
<li>Two-year warranty</li>
<li>Batteries included</li>
<li>On/Off Button</li>
<li>Audible/Silent</li>
<li>5 pack</li>
</ul>
Specifications
<ul>
<li>Operating Principles: Senses the steady-state electrostatic field produced by AC voltage through insulation without requiring contact with the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.</li>
<li>Voltage Sensing Ranges: Nominally, 90 V AC to 1000 V AC</li>
<li>Detector Tip Style: Flat-tip</li>
<li>Light Source: One high-intensity red LED</li>
<li>Agency Approvals: c CSA us, CE, C-Tick</li>
<li>Safety Rating: 1000 V, CAT IV</li>
<li>Safety Compliance: Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01 Pollution Degree 2</li>
<li>EMC Compliance: Meets IEC 61326-1:2006</li>
<li>IP Rating: IP 40</li>
<li>Operating Temperature: -10°C to 50°C (-14°F to 122°F)</li>
<li>Operating Humidity Ranges: 
</li>
<li>0% to 95% (0°C to 30°C)</li>
<li>0% to 75% (30°C to 40°C)</li>
<li>0% to 45% (40°C to 55°C)</li>
<li>Operating Altitude: 3000 m</li>
<li>Cleaning: Clean with a damp cloth</li>
<li>Batteries: 2 AAA alkaline batteries included</li>
<li>Battery Life: Typical battery life of greater than 1 year</li>
</ul>

Fluke 1AC Ii Voltalert 5-pack

fluke 1ac ii voltalert 5-pack paket electrical power testing pengujian daya listrik 5-pek ujian tenaga elektrik fluke/福禄克 件装 电力测试 福禄克

fluke-1ac-ii-voltalert-5-pack

Fluke T5-1000 + 1AC-II Multifunction Tester, No

fluke t5-1000 1ac-ii multifunction tester, penguji multifungsi 1ac-ii, tidak electrical power testing pengujian daya listrik pelbagai fungsi, ujian tenaga elektrik 多功能测试仪，无 电力测试 福禄克

fluke-t5-1000-1ac-ii-multifunction-tester-no

Fluke T5-600/62MAX +/1AC KIT Ii Multifunction Tester

fluke t5-600/62max +/1ac kit ii multifunction tester alat uji multifungsi electrical power testing pengujian daya listrik penguji pelbagai fungsi ujian tenaga elektrik 多功能测试仪 电力测试 福禄克