FLUKE

Construction

construction

Building Materials

building-materials

Test & Measurement

test-measurement

Multimeters

multimeters

Mechanical Parts

mechanical-parts

O Ring

o-ring

ID - Yong Leng Trading ETH Account

KOYO

Others

Enerpac

Triangle

Optibelt

Nachi

Roller Bearing

Hydraulic Seals

Ball Bearings

Linear Bearing

Plain Bearings

Cam Follower Bearings

Other Tools

V Rings

buyerIntroduction

Oring Metric 77 X 4 Nbr 70 Black Shiny

oring metric 77 nbr 70 black shiny metrik hitam mengkilap ring o-ring oem berkilat gelang 公制 黑色闪亮 o型圈 oem代工

oring-metric-77-x-4-nbr-70-black-shiny

Oring Metric 77 X 4 Silicone 70 Red Shiny

oring metric 77 silicone 70 red shiny metrik silikon merah mengkilap ring o-ring oem berkilat gelang 公制 硅胶 红色闪亮 o型圈 oem代工

oring-metric-77-x-4-silicone-70-red-shiny

Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).  

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR)  

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance.  

O-Rings and rubber seals are generally used for:

Applications that require resistance to OIL 

Applications that are required to work in low temperatures (-0°C) 

High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

Covering 	and lubricating the threading of the shaft 

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING AS568 AS018ID 18.77 X CS 1.78 Material : Nitrile (NBR) 70 ShoreAdditional InformationNitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Primary UsageO-Rings and rubber seals are generally used for:<ul class="md-block-unordered-list-item"><li>Applications that require resistance to OIL </li><li>Applications that are required to work in low temperatures (-0°C) </li><li>High performance Fuel systems that requires strictly no leakage</li><ul class="md-block-unordered-list-item"><li>Aircrafts </li><li>Marine Ships </li><li>F1 Cars</li></ul><li>General Industrial Use </li></ul>Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:<ul class="md-block-unordered-list-item"><li>Covering 	and lubricating the threading of the shaft </li></ul>The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.<ul class="md-block-unordered-list-item"><li>Don’t force it over sharp corners </li></ul>That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.<ul class="md-block-unordered-list-item"><li>Even stretching </li></ul>You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.<ul class="md-block-unordered-list-item"><li>Don’t roll it down the shaft </li></ul>Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.<ul class="md-block-unordered-list-item"><li>Finishing 	it off </li></ul>Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/NDISvOYZP6QlQfuLusj1vQ.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS018
ID 18.77 X CS 1.78&nbsp;
Material : Nitrile (NBR) 70 Shore
<ins>Additional Information</ins>
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>&nbsp;
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance.&nbsp;&nbsp;
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
<ul>
<li>Applications that require resistance to OIL&nbsp;</li>
<li>Applications that are required to work in low temperatures (-0°C)&nbsp;</li>
<li>High performance Fuel systems that requires strictly no leakage</li>
<ul>
<li>Aircrafts&nbsp;</li>
<li>Marine Ships&nbsp;</li>
<li>F1 Cars</li>
</ul>
<li>General Industrial Use&nbsp;&nbsp;&nbsp;</li>
</ul>
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
<ul>
<li>Covering 	and lubricating the threading of the shaft&nbsp;</li>
</ul>
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
<ul>
<li>Don’t force it over sharp corners&nbsp;</li>
</ul>
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
<ul>
<li>Even stretching&nbsp;</li>
</ul>
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
<ul>
<li>Don’t roll it down the shaft&nbsp;</li>
</ul>
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
<ul>
<li>Finishing 	it off&nbsp;</li>
</ul>
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:34p3d"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/NDISvOYZP6QlQfuLusj1vQ.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="34p3d" 
 layout="nodisplay"></amp-image-lightbox>

ORING AS568 AS018 ID 18.77 X CS 1.78 Nitrile (NBR) 70 Shore

oring as568 as018 id 18.77 cs 1.78 nitrile (nbr) 70 shore 18,77 1,78 ring o-ring oem gelang oem/oem代工 1.78腈（nbr）70肖氏 o型圈 oem代工

oring-as568-as018-id-18-77-x-cs-1-78-nitrile-nbr-70-shore

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). 

Overview on Application Rating for Material Nitrile (NBR) 

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

· Covering and lubricating the threading of the shaft

ORING AS568 AS361 ID 151.77 x CS 5.33Material : Nitrile (NBR) 70 ShoreAdditional InformationNitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/_O~cEOrdxc9kN4gkTcDrvz.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS361&nbsp;
ID 151.77 x CS 5.33
Material : Nitrile (NBR) 70 Shore
<ins>Additional Information</ins>
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:bngab"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/_O~cEOrdxc9kN4gkTcDrvz.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="bngab" 
 layout="nodisplay"></amp-image-lightbox>

ORING AS568 AS361 ID 151.77 x CS 5.33 Nitrile (NBR) 70 Shore

oring as568 as361 id 151.77 cs 5.33 nitrile (nbr) 70 shore 151,77 ring o-ring oem gelang oem/oem代工 5.33丁腈（nbr）70肖氏 o型圈 oem代工

oring-as568-as361-id-151-77-x-cs-5-33-nitrile-nbr-70-shore

BOLT DYNA 3/8INX70MM CS Galv (M10x77 Kuning) :

<h3 class="md-block-header-three">BOLT DYNA 3/8INX70MM CS Galv (M10x77 Kuning) :</h3>*this picture illutration only

<h3>BOLT DYNA 3/8INX70MM CS Galv (M10x77 Kuning) :</h3>
*this picture illutration only

Nadaa Kautsar

Facom

ELORA

Pferd

STANLEY

JOYKO

WHOLESAFETY

Drill Bits & Drill Bit Sets

Office Supplies

Filing and Storage

Kitchen Utensils

Safety Gloves

Screwdrivers

Other Measuring Tools

Copier Paper

Ink Cartridge, Drums & Toners

Bolt Dyna 3/8INX70MM Cs Galv (M10x77 Kuning)

bolt dyna 3/8inx70mm cs galv (m10x77 kuning) building materials bahan bangunan oem binaan oem/oem代工 螺栓 黄色) 建筑材料 oem代工 yellow)

bolt-dyna-3-8inx70mm-cs-galv-m10x77-kuning

The Fluke 77 IV digital multimeter has the features needed to repair most electrical and electronic problems. This meter is simple to use and has significant improvements over Fluke's original 70 Series with more measurement functions, conformance to the latest safety standards, and a much larger display that's easier to view. 

Ergonomic overmolded housing with integrated probe holders

Free your hands with the optional TPAK magnetic hanger

Meets Measurement Category 1000 V CAT III and Category IV 600 V safety standards 

Standards: ANSI / ISA S82.02.01, CSA C22.2–1010.1, IEC 61010 to 1000 V Measurement Category III, 600 V Measurement Category IV

Certifications: CSA, TÜV (EN61010), Π, (N10140)

Maximum Voltage Between Any Terminal and Earth Ground: 1000 V

Surge Protection: 8 kV peak per IEC 61010

Ω Fuse for mA Inputs: 440 mA, 1000 V FAST Fuse

Ω Fuse for A Inputs: 11 A, 1000 V FAST Fuse

Temperature Coefficient: 0.1 x (specified accuracy / °C (< 18°C or > 28°C)

Electromagnetic Compatibility (EN 61326–1:1997): In an RF field of 3 V/M, accuracy = specified accuracy except in temperature: specified accuracy ±5°C (9°F)

Relative Humidity (maximum non-condensing):

Battery Life: 400 hours typical (alkaline)

<h3 class="md-block-header-three">Fluke 77 Iv Digital Multimeter </h3>The Fluke 77 IV digital multimeter has the features needed to repair most electrical and electronic problems. This meter is simple to use and has significant improvements over Fluke&#x27;s original 70 Series with more measurement functions, conformance to the latest safety standards, and a much larger display that&#x27;s easier to view. It measures:<ul class="md-block-unordered-list-item"><li>Wide 1000 V measurement range</li><li>Average responding AC measurements</li><li>0.3% accuracy</li><li>10 Amps continuous (20 A for 30 seconds)</li><li>Frequency and capacitance</li><li>Resistance and continuity </li><li>Large display</li><li>Backlight for work in dim areas</li><li>Min / Max to record signal fluctuations</li><li>Ergonomic overmolded housing with integrated probe holders</li><li>Free your hands with the optional TPAK magnetic hanger</li><li>Auto and Manual ranging</li><li>Meets Measurement Category 1000 V CAT III and Category IV 600 V safety standards </li></ul><h4 class="md-block-header-four">Voltage DC</h4><ul class="md-block-unordered-list-item"><li>Range: 6.000 V – 1000 V</li><li>Best Accuracy: ±(0.3% + 1)</li><li>Best Resolution: 0.1 mV</li></ul><h4 class="md-block-header-four">Voltage AC</h4><ul class="md-block-unordered-list-item"><li>Range: 600.0 mV – 1000 V</li><li>Best Accuracy: ±(2.0% + 2)</li><li>Best Resolution: 1.0 mV</li></ul><h4 class="md-block-header-four">Amps AC</h4><ul class="md-block-unordered-list-item"><li>Range: 60.00 mA – 10 A</li><li>Best Accuracy: ±(2.5% + 2)</li><li>Best Resolution: 0.01 mA</li></ul><h4 class="md-block-header-four">Amps DC</h4><ul class="md-block-unordered-list-item"><li>Range: 60.00 mA – 10 A</li><li>Best Accuracy: ±(1.5% + 2)</li><li>Best Resolution: 0.01 mA</li></ul><h4 class="md-block-header-four">Resistance</h4><ul class="md-block-unordered-list-item"><li>Range: 600.0 Ω – 50 MΩ</li><li>Best Accuracy: ±(0.5% + 1)</li><li>Best Resolution: 0.1 Ω</li></ul><h4 class="md-block-header-four">Capacitance</h4><ul class="md-block-unordered-list-item"><li>Range: 1 nF – 9,999 μF</li><li>Best Accuracy: ±(1.2% + 2)</li><li>Best Resolution: 1 nF</li></ul><h4 class="md-block-header-four">Frequency</h4><ul class="md-block-unordered-list-item"><li>Range: 99.99 Hz – 99.99 kHz</li><li>Best Accuracy: ±(0.1% + 1)</li><li>Best Resolution: 0.01 Hz</li></ul><h4 class="md-block-header-four">Safety</h4><ul class="md-block-unordered-list-item"><li>Standards: ANSI / ISA S82.02.01, CSA C22.2–1010.1, IEC 61010 to 1000 V Measurement Category III, 600 V Measurement Category IV</li><li>Certifications: CSA, TÜV (EN61010), Π, (N10140)</li></ul><h3 class="md-block-header-three">General Specifications</h3><ul class="md-block-unordered-list-item"><li>Maximum Voltage Between Any Terminal and Earth Ground: 1000 V</li><li>Surge Protection: 8 kV peak per IEC 61010</li><li>Ω Fuse for mA Inputs: 440 mA, 1000 V FAST Fuse</li><li>Ω Fuse for A Inputs: 11 A, 1000 V FAST Fuse</li><li>Display:</li><ul class="md-block-unordered-list-item"><li>Digital: 6000 counts, updates 4/sec</li><li>Bar Graph: 33 segments, updates 32/sec</li><li>Frequency: 10,000 counts</li><li>Capacitance: 1,000 counts</li></ul><li>Altitude:</li><ul class="md-block-unordered-list-item"><li>Operating: 2,000 meters</li><li>Storage: 12,000 meters</li></ul><li>Temperature:</li><ul class="md-block-unordered-list-item"><li>Operating: -10°C to +50°C</li><li>Storage: -40°C to +60°C</li><li>Temperature Coefficient: 0.1 x (specified accuracy / °C (&lt; 18°C or &gt; 28°C)</li></ul><li>Electromagnetic Compatibility (EN 61326–1:1997): In an RF field of 3 V/M, accuracy = specified accuracy except in temperature: specified accuracy ±5°C (9°F)</li><li>Relative Humidity (maximum non-condensing):</li><ul class="md-block-unordered-list-item"><li>90% to 35°C</li><li>75% to 40°C</li><li>45% to 50°C</li></ul><li>Battery Life: 400 hours typical (alkaline)</li><li>Size (H x W x L): 4.3 x 9 x 18.5 cm</li><li>Weight: 420 g</li></ul>

<h3>Fluke 77 Iv Digital Multimeter&nbsp;</h3>
The Fluke 77 IV digital multimeter has the features needed to repair most electrical and electronic problems. This meter is simple to use and has significant improvements over Fluke's original 70 Series with more measurement functions, conformance to the latest safety standards, and a much larger display that's easier to view.&nbsp;
It measures:
<ul>
<li>Wide 1000 V measurement range</li>
<li>Average responding AC measurements</li>
<li>0.3% accuracy</li>
<li>10 Amps continuous (20 A for 30 seconds)</li>
<li>Frequency and capacitance</li>
<li>Resistance and continuity&nbsp;</li>
<li>Large display</li>
<li>Backlight for work in dim areas</li>
<li>Min / Max to record signal fluctuations</li>
<li>Ergonomic overmolded housing with integrated probe holders</li>
<li>Free your hands with the optional TPAK magnetic hanger</li>
<li>Auto and Manual ranging</li>
<li>Meets Measurement Category 1000 V CAT III and Category IV 600 V safety standards&nbsp;</li>
</ul>
<h4>Voltage DC</h4>
<ul>
<li>Range: 6.000 V – 1000 V</li>
<li>Best Accuracy: ±(0.3% + 1)</li>
<li>Best Resolution: 0.1 mV</li>
</ul>
<h4>Voltage AC</h4>
<ul>
<li>Range: 600.0 mV – 1000 V</li>
<li>Best Accuracy: ±(2.0% + 2)</li>
<li>Best Resolution: 1.0 mV</li>
</ul>
<h4>Amps AC</h4>
<ul>
<li>Range: 60.00 mA – 10 A</li>
<li>Best Accuracy: ±(2.5% + 2)</li>
<li>Best Resolution: 0.01 mA</li>
</ul>
<h4>Amps DC</h4>
<ul>
<li>Range: 60.00 mA – 10 A</li>
<li>Best Accuracy: ±(1.5% + 2)</li>
<li>Best Resolution: 0.01 mA</li>
</ul>
<h4>Resistance</h4>
<ul>
<li>Range: 600.0 Ω – 50 MΩ</li>
<li>Best Accuracy: ±(0.5% + 1)</li>
<li>Best Resolution: 0.1 Ω</li>
</ul>
<h4>Capacitance</h4>
<ul>
<li>Range: 1 nF – 9,999 μF</li>
<li>Best Accuracy: ±(1.2% + 2)</li>
<li>Best Resolution: 1 nF</li>
</ul>
<h4>Frequency</h4>
<ul>
<li>Range: 99.99 Hz – 99.99 kHz</li>
<li>Best Accuracy: ±(0.1% + 1)</li>
<li>Best Resolution: 0.01 Hz</li>
</ul>
<h4>Safety</h4>
<ul>
<li>Standards: ANSI / ISA S82.02.01, CSA C22.2–1010.1, IEC 61010 to 1000 V Measurement Category III, 600 V Measurement Category IV</li>
<li>Certifications: CSA, TÜV (EN61010), Π, (N10140)</li>
</ul>
<h3>General Specifications</h3>
<ul>
<li>Maximum Voltage Between Any Terminal and Earth Ground: 1000 V</li>
<li>Surge Protection: 8 kV peak per IEC 61010</li>
<li>Ω Fuse for mA Inputs: 440 mA, 1000 V FAST Fuse</li>
<li>Ω Fuse for A Inputs: 11 A, 1000 V FAST Fuse</li>
<li>Display:</li>
<ul>
<li>Digital: 6000 counts, updates 4/sec</li>
<li>Bar Graph: 33 segments, updates 32/sec</li>
<li>Frequency: 10,000 counts</li>
<li>Capacitance: 1,000 counts</li>
</ul>
<li>Altitude:</li>
<ul>
<li>Operating: 2,000 meters</li>
<li>Storage: 12,000 meters</li>
</ul>
<li>Temperature:</li>
<ul>
<li>Operating: -10°C to +50°C</li>
<li>Storage: -40°C to +60°C</li>
<li>Temperature Coefficient: 0.1 x (specified accuracy / °C (&lt; 18°C or &gt; 28°C)</li>
</ul>
<li>Electromagnetic Compatibility (EN 61326–1:1997): In an RF field of 3 V/M, accuracy = specified accuracy except in temperature: specified accuracy ±5°C (9°F)</li>
<li>Relative Humidity (maximum non-condensing):</li>
<ul>
<li>90% to 35°C</li>
<li>75% to 40°C</li>
<li>45% to 50°C</li>
</ul>
<li>Battery Life: 400 hours typical (alkaline)</li>
<li>Size (H x W x L): 4.3 x 9 x 18.5 cm</li>
<li>Weight: 420 g</li>
</ul>