Dixon

ELORA

Extech

Facom

FUJI Tools

METABO

Rucika

Adhesive

adhesive

Adhesive Glue

adhesive-glue

Power Tools

power-tools

Drills, Impact Drivers & Wrenches

drills-impact-drivers-wrenches

Test & Measurement

test-measurement

Electrical Power Testing

electrical-power-testing

Mechanical Parts

mechanical-parts

Gaskets

gaskets

Grinders

grinders

Hammers, Punches & Chisels

hammers-punches-chisels

Hammers & Mallets

hammers-mallets

O Ring

o-ring

Other Hand Tools

other-hand-tools

Other Tools

other-tools

Spanners & Sockets

spanners-sockets

Torque Wrenches

torque-wrenches

enabling operators to use this tool for a full working day

FUJI Marking Pen 20MM G-400<h3 class="md-block-header-three"> Benefits</h3><ul class="md-block-unordered-list-item"><li>enabling operators to use this tool for a full working day</li></ul><h3 class="md-block-header-three">Features</h3><ul class="md-block-unordered-list-item"><li>lower vibration level</li><li>oil free operation</li></ul><h3 class="md-block-header-three">Specifications</h3><ul class="md-block-unordered-list-item"><li>Diameter : 20 mm</li><li>Length : 140 mm</li><li>Net weight : 0.15 kg</li><li>Actual air consumption : 0.5 l/s</li></ul>

FUJI Marking Pen 20MM G-400
<h3>&nbsp;Benefits</h3>
<ul>
<li>enabling operators to use this tool for a full working day</li>
</ul>
<h3>Features</h3>
<ul>
<li>lower vibration level</li>
<li>oil free operation</li>
</ul>
<h3>Specifications</h3>
<ul>
<li>Diameter : 20 mm</li>
<li>Length : 140 mm</li>
<li>Net weight : 0.15 kg</li>
<li>Actual air consumption : 0.5 l/s</li>
</ul>

Pferd

MITUTOYO

BRADY

NILFISK

TOKU

Drill Bits & Drill Bit Sets

Grinding Abrasives

Other Measuring Tools

Power Tools Accessories

Weight, Force & Pressure Gauges

Tap & Die Wrenches

Automotive Equipment

PT Kawan Lama Sejahtera ETH Account

buyerIntroduction

Fuji Marking Pen 20MM G-400

fuji marking pen 20mm g-400 tools alat lainnya penanda alatan lain fuji/富士 记号笔 其他工具 富士工具

fuji-marking-pen-20mm-g-400

METABO Straight Grinder 6MM G400 600427000 

<h3 class="md-block-header-three">METABO Straight Grinder 6MM G400 600427000 </h3><ul class="md-block-unordered-list-item"><li>Input Power: 400 W</li><li>Output Power : 250 W</li><li>Size: 6 MM</li><li>No-load speed : 25000/Min</li><li>In Speed Load : 11000/Min</li></ul>

<h3>METABO Straight Grinder 6MM G400 600427000 </h3>
<ul>
<li>Input Power: 400 W</li>
<li>Output Power : 250 W</li>
<li>Size: 6 MM</li>
<li>No-load speed : 25000/Min</li>
<li>In Speed Load : 11000/Min</li>
</ul>

Metabo Straight Grinder 6MM G400 600427000

metabo straight grinder 6mm g400 600427000 grinders penggiling pengisar lurus pencanai metabo/元宝 麦太保直磨机 磨床 元宝

metabo-straight-grinder-6mm-g400-600427000

Material :  Viton Fluoroelastomers (FKM) 75 Shore   

Fluorocarbon O-Rings are usually call FKM or VITON elastomer, this elastomer are very close to being the universal material to be used in the sealing industry of O-Ring.

This is because due to it wideranges of chemical resistances and outstanding temperature combined with ozone, UV, weathering, and gasoline resistances. They have a temperature ranging from (-15`C to 199`C).

In addition fluorocarbon elastomer, have great benefit to be used in vacuum sealing due to its low gas impermeability ratings. 

The down side of fluorocarbon elastomer is, they should avoid being use in low temperature applications or exposing to hot water, steam, polar solvents, low molecular weight esters and esters, glycol based brake fluids or hot hydrofluoric or chlorosulfonic acids are a factor.

Overview on Application Rating for Material Silicone 

Heat Ozone & Aging Resistance - Excellent

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Fluorocarbon Viton O-Rings the standard nominal durometer is 75 Shore and 90 Shore.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING JIS B2401 G400 ID 399.30 x CS 5.70Material : Viton Fluoroelastomers (FKM) 75 Shore Fluorocarbon O-Rings are usually call FKM or VITON elastomer, this elastomer are very close to being the universal material to be used in the sealing industry of O-Ring.This is because due to it wideranges of chemical resistances and outstanding temperature combined with ozone, UV, weathering, and gasoline resistances. They have a temperature ranging from (-15&#x60;C to 199&#x60;C).In addition fluorocarbon elastomer, have great benefit to be used in vacuum sealing due to its low gas impermeability ratings. The down side of fluorocarbon elastomer is, they should avoid being use in low temperature applications or exposing to hot water, steam, polar solvents, low molecular weight esters and esters, glycol based brake fluids or hot hydrofluoric or chlorosulfonic acids are a factor.Temperature Range (Dry Heat)Low: -5&#x60;F / -15&#x60;C High: 390&#x60;F / 199&#x60;COverview on Application Rating for Material Silicone Properties (Rating)Oils &amp; Grease - ExcellentTear Strength – GoodFuel Resistance - GoodHeat Ozone &amp; Aging Resistance - ExcellentWater Swell Resistance - GoodAmmonia, Amines, Alkalis - PoorOther than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Fluorocarbon Viton O-Rings the standard nominal durometer is 75 Shore and 90 Shore.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/RyHndSOX80Yvr7zruT9y4A.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING JIS B2401 G400&nbsp;
ID 399.30 x CS 5.70
Material : Viton Fluoroelastomers (FKM) 75 Shore&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;
Fluorocarbon O-Rings are usually call FKM or VITON elastomer, this elastomer are very close to being the universal material to be used in the sealing industry of O-Ring.
This is because due to it wideranges of chemical resistances and outstanding temperature combined with ozone, UV, weathering, and gasoline resistances. They have a temperature ranging from (-15`C to 199`C).
In addition fluorocarbon elastomer, have great benefit to be used in vacuum sealing due to its low gas impermeability ratings.&nbsp;
The down side of fluorocarbon elastomer is, they should avoid being use in low temperature applications or exposing to hot water, steam, polar solvents, low molecular weight esters and esters, glycol based brake fluids or hot hydrofluoric or chlorosulfonic acids are a factor.
<ins>Temperature Range (Dry Heat)</ins>
Low: -5`F / -15`C High: 390`F / 199`C
<ins>Overview on Application Rating for Material Silicone </ins>
Properties (Rating)
Oils &amp; Grease - Excellent
Tear Strength – Good
Fuel Resistance - Good
Heat Ozone &amp; Aging Resistance - Excellent
Water Swell Resistance - Good
Ammonia, Amines, Alkalis - Poor
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Fluorocarbon Viton O-Rings the standard nominal durometer is 75 Shore and 90 Shore.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:9ml5h"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/RyHndSOX80Yvr7zruT9y4A.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="9ml5h" 
 layout="nodisplay"></amp-image-lightbox>

ID - Yong Leng Trading ETH Account

KOYO

Others

Enerpac

Triangle

Optibelt

Nachi

Roller Bearing

Hydraulic Seals

Ball Bearings

Linear Bearing

Plain Bearings

Cam Follower Bearings

V Rings

ORING JIS B2401 G400 ID 399.30 x CS 5.70 Viton Fluoroelastomers (FKM) 75 Shore

oring jis b2401 g400 id 399.30 cs 5.70 viton fluoroelastomers (fkm) 75 shore fluoroelastomer ring o-ring oem gelang oem/oem代工 5.70氟橡胶（fkm）75肖氏 o型圈 oem代工

oring-jis-b2401-g400-id-399-30-x-cs-5-70-viton-fluoroelastomers-fkm-75-shore

Silicone O-Rings are sometimes referred to VMQ O-Rings.

Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59`C to 232`C) and it has good retention of compression and flexibility. 

In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.

ORING JIS B2401 G395 ID 394.30 x CS 5.70Material : Silicone 70 Shore Silicone O-Rings are sometimes referred to VMQ O-Rings.Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59&#x60;C to 232&#x60;C) and it has good retention of compression and flexibility. In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.Temperature Range (Dry Heat)Low: -75&#x60;F / -59&#x60;C High: 450&#x60;F / 232&#x60;COverview on Application Rating for Material Silicone Properties (Rating)Oils &amp; Grease - FairTear Strength – PoorFuel Resistance - PoorHeat Ozone &amp; Aging Resistance - ExcellentWater Swell Resistance - ExcellentAbrasion Resistance - PoorOther than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/s0a77iPbd8xvo4WSSmfA4G.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING JIS B2401 G395
&nbsp;ID 394.30 x CS 5.70
Material : Silicone 70 Shore&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;&nbsp;&nbsp;
Silicone O-Rings are sometimes referred to VMQ O-Rings.
Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59`C to 232`C) and it has good retention of compression and flexibility.&nbsp;
In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.
<ins>Temperature Range (Dry Heat)</ins>
Low: -75`F / -59`C High: 450`F / 232`C
<ins>Overview on Application Rating for Material Silicone </ins>
Properties (Rating)
Oils &amp; Grease - Fair
Tear Strength – Poor
Fuel Resistance - Poor
Heat Ozone &amp; Aging Resistance - Excellent
Water Swell Resistance - Excellent
Abrasion Resistance - Poor
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:bknr1"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/s0a77iPbd8xvo4WSSmfA4G.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="bknr1" 
 layout="nodisplay"></amp-image-lightbox>

ORING JIS B2401 G400 ID 399.30 x CS 5.70 Silicone 70 Shore

oring jis b2401 g400 id 399.30 cs 5.70 silicone 70 shore silikon ring o-ring oem gelang oem/oem代工 5.70硅胶70肖氏 o型圈 oem代工

oring-jis-b2401-g400-id-399-30-x-cs-5-70-silicone-70-shore

4" Neoprene Gasket (1-Red Stripe) (400-G-NE)4" Neoprene Gasket (1-Red Stripe) (400-G-NE) :

Gasket camlock / seal camlock
Tebal : 6mm
Ukuran : 4 inch

seal karet berfungsi untuk mencegah terjadinya kebocoran.

<h3 class="md-block-header-three">4&quot; Neoprene Gasket (1-Red Stripe) (400-G-NE)4&quot; Neoprene Gasket (1-Red Stripe) (400-G-NE) :</h3>Gasket camlock / seal camlock Tebal : 6mm Ukuran : 4 inchseal karet berfungsi untuk mencegah terjadinya kebocoran.

<h3>4" Neoprene Gasket (1-Red Stripe) (400-G-NE)4" Neoprene Gasket (1-Red Stripe) (400-G-NE) :</h3>
Gasket camlock / seal camlock 
Tebal : 6mm 
Ukuran : 4 inch
seal karet berfungsi untuk mencegah terjadinya kebocoran.

Nadaa Kautsar

STANLEY

JOYKO

WHOLESAFETY

Building Materials

Office Supplies

Filing and Storage

Kitchen Utensils

Safety Gloves

Screwdrivers

Copier Paper

Ink Cartridge, Drums & Toners

4" Neoprene Gasket (1-Red Stripe) (400-G-NE)

4" neoprene gasket (1-red stripe) (400-g-ne) gaskets dixon neoprena (1-jalur merah) dixon/狄克逊 氯丁橡胶垫片（1-红色条纹）（400-g-ne） 狄克逊

4-neoprene-gasket-1-red-stripe-400-g-ne

Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). 

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR) 

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.

ORING JIS B2401 G400 ID 399.30 x CS 5.70Material : Nitrile (NBR) 70 Shore Nitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/Zml4_Vx3BYberNb1CMJ0wg.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING JIS B2401 G400&nbsp;
ID 399.30 x CS 5.70
Material : Nitrile (NBR) 70 Shore
&nbsp;&nbsp;&nbsp;&nbsp;
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:7fa5h"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/Zml4_Vx3BYberNb1CMJ0wg.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="7fa5h" 
 layout="nodisplay"></amp-image-lightbox>

ORING JIS B2401 G400 ID 399.30 x CS 5.70 Nitrile (NBR) 70 Shore

oring jis b2401 g400 id 399.30 cs 5.70 nitrile (nbr) 70 shore ring o-ring oem gelang oem/oem代工 5.70腈（nbr）70肖氏 o型圈 oem代工

oring-jis-b2401-g400-id-399-30-x-cs-5-70-nitrile-nbr-70-shore

ORING JIS B2401 G400 ID 399.30 x CS 5.70Material : Nitrile (NBR) 90 Shore Nitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/BGPrKrDVctPzZ7XKlvB1UO.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING JIS B2401 G400
&nbsp;ID 399.30 x CS 5.70
Material : Nitrile (NBR) 90 Shore&nbsp;&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;&nbsp;&nbsp;
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:8pudq"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/BGPrKrDVctPzZ7XKlvB1UO.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="8pudq" 
 layout="nodisplay"></amp-image-lightbox>

ORING JIS B2401 G400 ID 399.30 x CS 5.70 Nitrile (NBR) 90 Shore

oring jis b2401 g400 id 399.30 cs 5.70 nitrile (nbr) 90 shore ring o-ring oem pantai gelang oem/oem代工 5.70腈（nbr）90肖氏 o型圈 oem代工

oring-jis-b2401-g400-id-399-30-x-cs-5-70-nitrile-nbr-90-shore

Khusus didesain untuk area beriklim tropis

Cocok untuk aplikasi Rumah tangga & Proyek

<h3 class="md-block-header-three">Rucika RU Glue PVC 400 gr</h3><ul class="md-block-unordered-list-item"><li>Perekat Pipa dan Sambungan PVC</li><li>Teknologi Solvent Cement</li><li>Khusus didesain untuk area beriklim tropis</li><li>Cocok untuk aplikasi Rumah tangga &amp; Proyek</li><li>Isi 400 g </li></ul>

<h3>Rucika RU Glue PVC 400 gr</h3>
<ul>
<li>Perekat Pipa dan Sambungan PVC</li>
<li>Teknologi Solvent Cement</li>
<li>Khusus didesain untuk area beriklim tropis</li>
<li>Cocok untuk aplikasi Rumah tangga &amp; Proyek</li>
<li>Isi 400 g 
&nbsp;</li>
</ul>

Rucika Ru Glue Pvc 400 Gr

rucika ru glue pvc 400 gr adhesive lem perekat gam pelekat 胶水 鲁西卡

rucika-ru-glue-pvc-400-gr

METABO cordless Wrench SSW18LTX 400 602205500

High torque machine with low kick-back torque. 

Ultra-M technology for highest performance, gentle charging, optimum energy utilisation and long service life.

Compact cordless impact driver for tough applications. 

Three speed/torque lev e ls for varied ranges of applications. 

Integrated working light to illuminate the work site. 

Robust die cast aluminium gear ho usin g for optimum heat dissipation and durability. 

With handy belt h ook and bit case, can be fixed either on the right or left side. 

Ultra-M technology for highest performance, gentle char ging, optim um energy utilisation and long service life. 

Batte ry packs with capacity display for checking the charge status . 

3-year bat tery pack warranty by means of Ultra-M technology .

Maximum impact rate le vel 1: 1.900 /min 

Bit retainer Male square: 1/2 Inch (12.70 m m) 

<h3 class="md-block-header-three">METABO cordless Wrench SSW18LTX 400 602205500</h3>Benefits<ul class="md-block-unordered-list-item"><li>High torque machine with low kick-back torque. </li><li>Ultra-M technology for highest performance, gentle charging, optimum energy utilisation and long service life.</li></ul>Features<ul class="md-block-unordered-list-item"><li>Compact cordless impact driver for tough applications. </li><li>High torque machine with low kick-back torque. </li><li>Three speed/torque lev e ls for varied ranges of applications. </li><li>Integrated working light to illuminate the work site. </li><li>Robust die cast aluminium gear ho usin g for optimum heat dissipation and durability. </li><li>With handy belt h ook and bit case, can be fixed either on the right or left side. </li><li>Ultra-M technology for highest performance, gentle char ging, optim um energy utilisation and long service life. </li><li>Batte ry packs with capacity display for checking the charge status . </li><li>3-year bat tery pack warranty by means of Ultra-M technology .</li></ul>Specifications<ul class="md-block-unordered-list-item"><li>Idle revolution 0 - 2.300 /min </li><li>Idling speed level 1: 0 - 900 /min </li><li>Maximum impact rate: 3.000 /min </li><li>Maximum impact rate le vel 1: 1.900 /min </li><li>Maximum torque: 210 Nm </li><li>Maximum torqu e leve l 1: 100 Nm </li><li>Bit retainer Male square: 1/2 Inch (12.70 m m) </li><li>We ight (including battery pack): 1.4 kg</li></ul>Technical Spec<ul class="md-block-unordered-list-item"><li>Netto Weight : 1.400 KG</li><li>Unit Demension : 162.6 X 68.6 X 193 MM</li><li>Height Demension : 11.500</li><li>Length Demension : 35.000</li><li>Width Demension : 31.000</li><li>Type : Cordless</li><li>Dimension uom : 35.000</li><li>No Wheel Speed : 2300 Rpm </li></ul>

<h3>METABO cordless Wrench SSW18LTX 400 602205500</h3>
Benefits
<ul>
<li>High torque machine with low kick-back torque.&nbsp;</li>
<li>Ultra-M technology for highest performance, gentle charging, optimum energy utilisation and long service life.</li>
</ul>
Features
<ul>
<li>Compact cordless impact driver for tough applications.&nbsp;</li>
<li>High torque machine with low kick-back torque.&nbsp;</li>
<li>Three speed/torque lev e ls for varied ranges of applications.&nbsp;</li>
<li>Integrated working light to illuminate the work site.&nbsp;</li>
<li>Robust die cast aluminium gear ho usin g for optimum heat dissipation and durability.&nbsp;</li>
<li>With handy belt h ook and bit case, can be fixed either on the right or left side.&nbsp;</li>
<li>Ultra-M technology for highest performance, gentle char ging, optim um energy utilisation and long service life.&nbsp;</li>
<li>Batte ry packs with capacity display for checking the charge status .&nbsp;</li>
<li>3-year bat tery pack warranty by means of Ultra-M technology .</li>
</ul>
Specifications
<ul>
<li>Idle revolution 0 - 2.300 /min&nbsp;</li>
<li>Idling speed level 1: 0 - 900 /min&nbsp;</li>
<li>Maximum impact rate: 3.000 /min&nbsp;</li>
<li>Maximum impact rate le vel 1: 1.900 /min&nbsp;</li>
<li>Maximum torque: 210 Nm&nbsp;</li>
<li>Maximum torqu e leve l 1: 100 Nm&nbsp;</li>
<li>Bit retainer Male square: 1/2 Inch (12.70 m m)&nbsp;</li>
<li>We ight (including battery pack): 1.4 kg</li>
</ul>
Technical Spec
<ul>
<li>Netto Weight : 1.400 KG</li>
<li>Unit Demension : 162.6 X 68.6 X 193 MM</li>
<li>Height Demension : 11.500</li>
<li>Length Demension : 35.000</li>
<li>Width Demension : 31.000</li>
<li>Type : Cordless</li>
<li>Dimension uom : 35.000</li>
<li>No Wheel Speed : 2300 Rpm&nbsp;</li>
</ul>

Metabo Cordless Wrench SSW18LTX 400 602205500

metabo cordless wrench ssw18ltx 400 602205500 drills, impact drivers wrenches bor, driver dampak kunci pas sepana tanpa kord gerudi, pemacu hentaman perengkuh metabo/元宝 充电式扳手 钻，冲击起子和扳手 元宝

metabo-cordless-wrench-ssw18ltx-400-602205500

Elora 2080-2100 400-2100 Nm Torque Wrench 1″ With Vernier Scale

Description:- For controlled torque application from 11 – 2000 Nm
excellent readable measurement unit for precise, correct adjustment
main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb
safe locking of the set torque value
bi-directional fixing
push through ratchet 3/4” with 10° smallest swivel angle
with robust, matt steel tube
wear-free mechanism made from hardened special tool steel
with very noticeable and audible (”click”) signal
ergonomic, impact resistant plastic handle
calibration accuracy of +- 4%
classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate

<h3 class="md-block-header-three">Elora 2080-2100 400-2100 Nm Torque Wrench 1″ With Vernier Scale</h3><h3 class="md-block-header-three">Product code: 2080021001000 </h3><ul class="md-block-unordered-list-item"><li>Description:- For controlled torque application from 11 – 2000 Nm excellent readable measurement unit for precise, correct adjustment main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb safe locking of the set torque value bi-directional fixing push through ratchet 3/4” with 10° smallest swivel angle with robust, matt steel tube wear-free mechanism made from hardened special tool steel with very noticeable and audible (”click”) signal ergonomic, impact resistant plastic handle calibration accuracy of +- 4% classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li><li>Output Male Square:- 1″</li><li>Head:- Reversible ratchet</li><li>Measuring range Nm:- 400-2100</li><li>Measuring range ft.lb.:- 300-1500</li><li>Graduation Nm:- 100</li><li>Fine dial Nm:- 10</li><li>Length mm:- 2050</li><li>Weight g:- 14500</li></ul>

<h3>Elora 2080-2100 400-2100 Nm Torque Wrench 1″ With Vernier Scale</h3>
<h3>Product code: 2080021001000 </h3>
<ul>
<li>Description:- For controlled torque application from 11 – 2000 Nm 
excellent readable measurement unit for precise, correct adjustment 
main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb 
safe locking of the set torque value 
bi-directional fixing 
push through ratchet 3/4” with 10° smallest swivel angle 
with robust, matt steel tube 
wear-free mechanism made from hardened special tool steel 
with very noticeable and audible (”click”) signal 
ergonomic, impact resistant plastic handle 
calibration accuracy of +- 4% 
classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li>
<li>Output Male Square:- 1″</li>
<li>Head:- Reversible ratchet</li>
<li>Measuring range Nm:- 400-2100</li>
<li>Measuring range ft.lb.:- 300-1500</li>
<li>Graduation Nm:- 100</li>
<li>Fine dial Nm:- 10</li>
<li>Length mm:- 2050</li>
<li>Weight g:- 14500</li>
</ul>

Kennedy

FORCE

Iwata

WIHA

MAKITA

FLUKE

Logitech

Fluke Networks

Impact Sockets

IT Accessories

Screwdriver Bits & Bit Set

Ring Spanners

Sockets

Hex Keys & Sets

Open End Spanners

Painting Tools

Stefy

elora 2080-2100 400-2100 nm torque wrench 1″ vernier scale kunci torsi dengan skala wrenches pas perengkuh tork elora/埃洛拉 nm扭力扳手1“带游标刻度尺 扭力扳手 埃洛拉

elora-2080-2100-400-2100-nm-torque-wrench-1-with-vernier-scale

EXTECH Conductivity Meter EC400 W/BATTERY

The Extech EC400 ExStik features six units of measure, internal memory that stores up to 15 labeled readings for easy recall, adjustable conductivity to TDS ratio factor from 0.4 to 1.0, and self-calibration upon power up. The EC400 incorporates the latest microprocessor chip technology and patented sensor technology to enable the simultaneous measurement of conductivity, TDS, salinity, and temperature. With the touch of a button the EC400 allows you the flexibility of interchangeable cell constants and has made the job of testing fast, accurate, and repeatable. Complete with meter and Conductivity cell, protective cap, sample cup, four CR2032 batteries, and 48inch(1.2m) neckstrap.

<h3 class="md-block-header-three">EXTECH Conductivity Meter EC400 W/BATTERY</h3><h3 class="md-block-header-three">Benefits</h3><ul class="md-block-unordered-list-item"><li>The Extech EC400 ExStik features six units of measure, internal memory that stores up to 15 labeled readings for easy recall, adjustable conductivity to TDS ratio factor from 0.4 to 1.0, and self-calibration upon power up. The EC400 incorporates the latest microprocessor chip technology and patented sensor technology to enable the simultaneous measurement of conductivity, TDS, salinity, and temperature. With the touch of a button the EC400 allows you the flexibility of interchangeable cell constants and has made the job of testing fast, accurate, and repeatable. Complete with meter and Conductivity cell, protective cap, sample cup, four CR2032 batteries, and 48inch(1.2m) neckstrap.</li></ul><h3 class="md-block-header-three">Features</h3><ul class="md-block-unordered-list-item"><li>Autoranging meter offers 3 ranges of measurements from tap water to wastewater and any aqueous solution</li><li>Units of measure include µS/cm, mS/cm, ppm, ppt, mg/L, and g/L</li><li>Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 - conveniently calculates the TDS value</li><li>Large 3-1/2 digit (2000 count) Digital display with analog bargraph to indicate sample trends</li><li>Data Hold, Auto Power Off and low battery indication</li><li>Automatic Temperature Compensation of 2% per DegC</li><li>Simultaneous display of Conductivity, TDS, or Salinity plus Temperature</li><li>Internal memory stores up to 25 labeled readings for easy recall</li><li>Self calibration of electronics on power up</li><li>Order Conductivity standards separately</li><li>Complete with meter and Conductivity cell, protective cap, sample cup, four CR2032 batteries, and 48inch(1.2m) neckstrap</li></ul><h3 class="md-block-header-three">Specifications</h3><ul class="md-block-unordered-list-item"><li>Conductivity 0 to 199.9uS, 200 to 1999uS, 2.00 to 19.99mS</li><li>TDS/Salinity/Fluoride TDS/Salinity: 0 to 99.9ppm (mg/L), 100 to 999ppm (mg/L), 1.00 to 9.99ppt (g/L)</li><li>Temperature 32Deg to 149DegF (0 to 65DegC)</li><li>Max. Resolution 0.1uS, 0.1ppm (mg/L), 0.01pH, 0.1DegF/DegC</li><li>Basic Accuracy +-2%FS, +-0.01pH, +-1.8DegF/1DegC</li><li>Dimensions 1.4x6.8x1.6 inch (35.6x172.7x40.6mm)</li><li>Weight 3.8oz (110g) </li></ul><h3 class="md-block-header-three">Technical Specifications</h3><ul class="md-block-unordered-list-item"><li>Netto Weight : 0.090 KG</li><li>Height Demension : 8 CM</li><li>Length Demension : 8 CM</li><li>Width Demension : 22 CM</li><li>Type : CONDUCTIVITY METER</li><li>Temperature : 0 to 65 DegC</li></ul>

<h3>EXTECH Conductivity Meter EC400 W/BATTERY</h3>
<h3>Benefits</h3>
<ul>
<li>The Extech EC400 ExStik features six units of measure, internal memory that stores up to 15 labeled readings for easy recall, adjustable conductivity to TDS ratio factor from 0.4 to 1.0, and self-calibration upon power up. The EC400 incorporates the latest microprocessor chip technology and patented sensor technology to enable the simultaneous measurement of conductivity, TDS, salinity, and temperature. With the touch of a button the EC400 allows you the flexibility of interchangeable cell constants and has made the job of testing fast, accurate, and repeatable. Complete with meter and Conductivity cell, protective cap, sample cup, four CR2032 batteries, and 48inch(1.2m) neckstrap.</li>
</ul>
<h3>Features</h3>
<ul>
<li>Autoranging meter offers 3 ranges of measurements from tap water to wastewater and any aqueous solution</li>
<li>Units of measure include µS/cm, mS/cm, ppm, ppt, mg/L, and g/L</li>
<li>Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 - conveniently calculates the TDS value</li>
<li>Large 3-1/2 digit (2000 count) Digital display with analog bargraph to indicate sample trends</li>
<li>Data Hold, Auto Power Off and low battery indication</li>
<li>Automatic Temperature Compensation of 2% per DegC</li>
<li>Simultaneous display of Conductivity, TDS, or Salinity plus Temperature</li>
<li>Internal memory stores up to 25 labeled readings for easy recall</li>
<li>Self calibration of electronics on power up</li>
<li>Order Conductivity standards separately</li>
<li>Complete with meter and Conductivity cell, protective cap, sample cup, four CR2032 batteries, and 48inch(1.2m) neckstrap</li>
</ul>
<h3>Specifications</h3>
<ul>
<li>Conductivity 0 to 199.9uS, 200 to 1999uS, 2.00 to 19.99mS</li>
<li>TDS/Salinity/Fluoride TDS/Salinity: 0 to 99.9ppm (mg/L), 100 to 999ppm (mg/L), 1.00 to 9.99ppt (g/L)</li>
<li>Temperature 32Deg to 149DegF (0 to 65DegC)</li>
<li>Max. Resolution 0.1uS, 0.1ppm (mg/L), 0.01pH, 0.1DegF/DegC</li>
<li>Basic Accuracy +-2%FS, +-0.01pH, +-1.8DegF/1DegC</li>
<li>Dimensions 1.4x6.8x1.6 inch (35.6x172.7x40.6mm)</li>
<li>Weight 3.8oz (110g)&nbsp;</li>
</ul>
<h3>Technical Specifications</h3>
<ul>
<li>Netto Weight : 0.090 KG</li>
<li>Height Demension : 8 CM</li>
<li>Length Demension : 8 CM</li>
<li>Width Demension : 22 CM</li>
<li>Type : CONDUCTIVITY METER</li>
<li>Temperature : 0 to 65 DegC</li>
</ul>

Extech Conductivity Meter EC400 W/BATTERY

extech conductivity meter ec400 w/battery electrical power testing pengujian daya listrik kekonduksian ujian tenaga elektrik extech/艾克泰克 电导率仪 带电池 电力测试 艾克泰克