Moxa

IT & Electronics

it-electronics

Networking Products

networking-products

MOXA General Device Servers NPORT 5650-8 :

 Moxa - 8-port desktop lite device server, 10/100M Ethernet, RS-232/422/485 DB9, 12-48VDC, -40-75C.

Ethernet Interface :
10/100BaseT(X) Ports (RJ45 connector)1
Magnetic Isolation Protection1.5 kV (built-in)

Ethernet Software Features :
Configuration OptionsWeb Console (HTTP), Windows Utility, Telnet Console, Serial Console
ManagementDHCP Client, HTTP, IPv4, SMTP, SNMPv1, Telnet, ARP, Rtelnet, DNS, BOOTP, UDP, TCP/IP, ICMP
Windows Real COM DriversWindows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY DriversSCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6.x, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY DriversKernel version: 2.4.x, 2.6.x, 3.x, 4.x
Android APIAndroid 3.1.x and later
MIBRFC1213, RFC1317
Time ManagementSNTP

Serial Interface :
Connector DB9 male
No. of Ports8
Serial StandardsNPort 5610-8-DTL Series: RS-232NPort 5650-8-DTL Series: RS-232, RS-422, RS-485
BaudrateSupports standard baudrates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k
Data Bits5, 6, 7, 8
Stop Bits1, 1.5, 2
ParityNone, Even, Odd, Space, Mark
Flow ControlRTS/CTS, DTR/DSR, XON/XOFF
IsolationNPort 5650I-8-DTL Series: 2 kV
Pull High/Low Resistor for RS-4851 kilo-ohm, 150 kilo-ohms
RS-485 Data Direction ControlADDC® (automatic data direction control)
Terminator for RS-485NPort 5650 Series: 120 ohms

<h3 class="md-block-header-three">MOXA General Device Servers NPORT 5650-8 :</h3> Moxa - 8-port desktop lite device server, 10/100M Ethernet, RS-232/422/485 DB9, 12-48VDC, -40-75C.Ethernet Interface : 10/100BaseT(X) Ports (RJ45 connector)1 Magnetic Isolation Protection1.5 kV (built-in)Ethernet Software Features : Configuration OptionsWeb Console (HTTP), Windows Utility, Telnet Console, Serial Console ManagementDHCP Client, HTTP, IPv4, SMTP, SNMPv1, Telnet, ARP, Rtelnet, DNS, BOOTP, UDP, TCP/IP, ICMP Windows Real COM DriversWindows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded Fixed TTY DriversSCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6.x, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X Linux Real TTY DriversKernel version: 2.4.x, 2.6.x, 3.x, 4.x Android APIAndroid 3.1.x and later MIBRFC1213, RFC1317 Time ManagementSNTPSerial Interface : Connector DB9 male No. of Ports8 Serial StandardsNPort 5610-8-DTL Series: RS-232NPort 5650-8-DTL Series: RS-232, RS-422, RS-485 BaudrateSupports standard baudrates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k Data Bits5, 6, 7, 8 Stop Bits1, 1.5, 2 ParityNone, Even, Odd, Space, Mark Flow ControlRTS/CTS, DTR/DSR, XON/XOFF IsolationNPort 5650I-8-DTL Series: 2 kV Pull High/Low Resistor for RS-4851 kilo-ohm, 150 kilo-ohms RS-485 Data Direction ControlADDC® (automatic data direction control) Terminator for RS-485NPort 5650 Series: 120 ohms

<h3>MOXA General Device Servers NPORT 5650-8 :</h3>
&nbsp;Moxa - 8-port desktop lite device server, 10/100M Ethernet, RS-232/422/485 DB9, 12-48VDC, -40-75C.
Ethernet Interface : 
10/100BaseT(X) Ports (RJ45 connector)1 
Magnetic Isolation Protection1.5 kV (built-in)
Ethernet Software Features : 
Configuration OptionsWeb Console (HTTP), Windows Utility, Telnet Console, Serial Console 
ManagementDHCP Client, HTTP, IPv4, SMTP, SNMPv1, Telnet, ARP, Rtelnet, DNS, BOOTP, UDP, TCP/IP, ICMP 
Windows Real COM DriversWindows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded 
Fixed TTY DriversSCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6.x, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X 
Linux Real TTY DriversKernel version: 2.4.x, 2.6.x, 3.x, 4.x 
Android APIAndroid 3.1.x and later 
MIBRFC1213, RFC1317 
Time ManagementSNTP
Serial Interface : 
Connector DB9 male 
No. of Ports8 
Serial StandardsNPort 5610-8-DTL Series: RS-232NPort 5650-8-DTL Series: RS-232, RS-422, RS-485 
BaudrateSupports standard baudrates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k 
Data Bits5, 6, 7, 8 
Stop Bits1, 1.5, 2 
ParityNone, Even, Odd, Space, Mark 
Flow ControlRTS/CTS, DTR/DSR, XON/XOFF 
IsolationNPort 5650I-8-DTL Series: 2 kV 
Pull High/Low Resistor for RS-4851 kilo-ohm, 150 kilo-ohms 
RS-485 Data Direction ControlADDC® (automatic data direction control) 
Terminator for RS-485NPort 5650 Series: 120 ohms

Light Signal 

Network Routers

Network Switches

IT Accessories

Led Lights

Emergency Lights

Data Storage

Other Electrical Accessories

Light Bulbs

Iis Sriyanah 

buyerIntroduction

Moxa General Device Servers NPORT 5650-8

moxa general device servers nport 5650-8 networking products produk jaringan pelayan peranti umum rangkaian moxa/艾草 通用设备服务器 网络产品 艾草

moxa-general-device-servers-nport-5650-8

MOXA serial device servers NPort 5610 8 DTL T :

NPort 5600-8-DTL device servers can conveniently and transparently connect 8 serial devices to an Ethernet network, allowing you to network your existing serial devices with basic configurations. You can both centralize management of your serial devices and distribute management hosts over the network. The NPort® 5600-8-DTL device servers have a smaller form factor than our 19-inch models, making them a great choice for applications that need additional serial ports when mounting rails are not available.


Convenient Design for RS-485 Applications
The NPort 5650-8-DTL device servers support selectable 1 kilo-ohm and 150 kilo-ohms pull high/low resistors and a 120-ohm terminator. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, NPort 5600-8-DTL device servers use DIP switches to allow users to adjust termination and pull high/low resistor values manually for each serial port.


LED Indicators to Ease Your Maintenance Tasks
The System LED, Serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The NPort 5600’s LEDs not only indicate current system and network status, but they also help field engineers monitor the status of attached serial devices.


Features and Benefits
- 8 serial ports supporting RS-232/422/485
- Compact desktop design
- 10/100M auto-sensing Ethernet
- Configure by Telnet, web browser, or Windows utility
- Supports Real COM and TCP server, TCP client, UDP socket modes
- SNMP MIB-II for network management 

<h3 class="md-block-header-three">MOXA serial device servers NPort 5610 8 DTL T :</h3>NPort 5600-8-DTL device servers can conveniently and transparently connect 8 serial devices to an Ethernet network, allowing you to network your existing serial devices with basic configurations. You can both centralize management of your serial devices and distribute management hosts over the network. The NPort® 5600-8-DTL device servers have a smaller form factor than our 19-inch models, making them a great choice for applications that need additional serial ports when mounting rails are not available. Convenient Design for RS-485 Applications The NPort 5650-8-DTL device servers support selectable 1 kilo-ohm and 150 kilo-ohms pull high/low resistors and a 120-ohm terminator. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, NPort 5600-8-DTL device servers use DIP switches to allow users to adjust termination and pull high/low resistor values manually for each serial port. LED Indicators to Ease Your Maintenance Tasks The System LED, Serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The NPort 5600’s LEDs not only indicate current system and network status, but they also help field engineers monitor the status of attached serial devices. Features and Benefits - 8 serial ports supporting RS-232/422/485 - Compact desktop design - 10/100M auto-sensing Ethernet - Configure by Telnet, web browser, or Windows utility - Supports Real COM and TCP server, TCP client, UDP socket modes - SNMP MIB-II for network management

<h3>MOXA serial device servers NPort 5610 8 DTL T :</h3>
NPort 5600-8-DTL device servers can conveniently and transparently connect 8 serial devices to an Ethernet network, allowing you to network your existing serial devices with basic configurations. You can both centralize management of your serial devices and distribute management hosts over the network. The NPort® 5600-8-DTL device servers have a smaller form factor than our 19-inch models, making them a great choice for applications that need additional serial ports when mounting rails are not available. 

Convenient Design for RS-485 Applications 
The NPort 5650-8-DTL device servers support selectable 1 kilo-ohm and 150 kilo-ohms pull high/low resistors and a 120-ohm terminator. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, NPort 5600-8-DTL device servers use DIP switches to allow users to adjust termination and pull high/low resistor values manually for each serial port. 

LED Indicators to Ease Your Maintenance Tasks 
The System LED, Serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The NPort 5600’s LEDs not only indicate current system and network status, but they also help field engineers monitor the status of attached serial devices. 

Features and Benefits 
- 8 serial ports supporting RS-232/422/485 
- Compact desktop design 
- 10/100M auto-sensing Ethernet 
- Configure by Telnet, web browser, or Windows utility 
- Supports Real COM and TCP server, TCP client, UDP socket modes 
- SNMP MIB-II for network management&nbsp;